Automatic pulse repair 10S 42V 6A 8A li-ion battery chargers lithium battery motorcycle car battery charger
| Input |
100-240VAC,50/60HZ |
Input Plug |
EU US UK AUS JP Korea Italy Brazil
India South Africa |
| Output42 |
V8A |
Charge mode |
CC--CV Mode |
| Led Indicator |
Red--charging;
Green--full charge |
Protection |
Over-current, Over-voltage,
Short-circuit, Polarity reverse |
| Suitable Battery |
Lithium Ion battery pack |
Efficiency |
>82% |
| Output connector |
customized(as below) |
Size & Weight |
210*150*65mm 2kg |
| Hi-Pot |
3000Vac/60S |
MTBF |
50000hrs |
| Operating Temperature |
-20ºC~ +50ºC |
Storage Temperature |
-40ºC~ +80ºC |
| Certification |
CE FCC GS CB PSE KC SAA |
Lead time |
sample: 3-5 days
Order: 12-15 days |
| Warranty |
2 Years |
Package |
50*44*33cm 2pcs/ctn |
Features:
1).Short-circuit protection,charger o/p current automatically when short-circuit.
2).Overload protection:Charger o/p current limited automatically when overload.
3).Reverse polarity protection:It will shut down when the wire is connected,charge DC fuse or remove the fault.
4).3-stage charging mode:CC(constant current), CV(constant voltage) and float stage.
5).Reliable, elegant, Small size, light, with cooling fan.
6).Charging state:TWO LED display.
7). Multiple plugs can be selected
Product Display:
1. The shell is made of high temperature, wear-resistant, impact resistant ABS+PC composite material. It can effectively improve
the heat dissipation and ensure that the temperature of the power supply is not excessive
Smart Cooling hole with fan design
2.That can effectively improve the heat dissipation of the power source, so that the charger
can be kept in the proper humidity and temperature, and effectively prolong the service life of the charger.
Charging operation
Step 1, Examine and make sure rated voltage of battery is conforming to output voltage of charger.
Step 2, Connect correctly the charger and the battery.
Step 3, Examine and make sure mains supply voltage is conforming to input voltage of the charger.
Step 4, Connect mains supply and the battery, watch to see if the indicator is on and the cooling fan is working when charging.
Step 5, if the charger refuse to work, turn off mains supply immediately and check all the connecting cables between mains supply, the battery and the charger.
CE CERTIFICATE
Audited Supplier 
){kind=link}
){kind=link}